Sabre Bushings Cone Kit
Want to make your longboard trucks turn more and lean harder? A Sabre Cone kit consists of two Cone bushings in your choice of durometer, plus two cupped cone washers, for maximum lean and carve.
Sabre Bushings are compatible with all longboard trucks out there that use a 16mm/0.6" tall bushing top and bottom. This stack height on Sabre bushings is ever-so-slightly higher than most other truck brands - you can see how they compare in the table below:
| Brand/Truck | Total Stack Height Inc. washers |
| Sabre Standard and Forged | 35.3mm |
| Bear Gen 6 | 34.6mm |
| Carver CX (front and rear) | 34.6mm |
| Paris V3 | 34.6mm |
| Caliber III | 32mm or 37.1mm |
| Pantheon Stylus | 34.2mm |
Each kit contains two bushings and two washers, packed in a recyclable paper bag. Gravity poured from Sabre's own formula in the USA.
- Make your longboard trucks turn more!
- 16mm/0.6" tall
- Kit of 2 bushings and washers - enough for one truck
- Packed with a sticker in a recyclable paper bag
- Available in X-Type (86A Orange), F-Type (90A Teal), R-Type (93A Green) and H-Type (96A Grey)
Use the table below to select the correct durometer:
- Cruising and Carving
| Skater weight | Durometer |
| 50 - 100 lbs / 23-46kgs | 65A-80A |
| 75 - 125 lbs / 35-57kgs | 80A-85A |
| 100 - 145 lbs / 46-66 kgs | 85A-88A |
| 125 - 175 lbs / 57-80 kgs | 87A-91A |
| 145 - 195 lbs / 66-89 kgs | 88A-94A |
| 175 - 220+ lbs / 80-100+ kgs | 91A-97A |
- Freeride
| Skater weight | Durometer |
| 50 - 100 lbs / 23-46kgs | 68A-80A |
| 75 - 125 lbs / 35-57kgs | 80A-85A |
| 100 - 145 lbs / 46-66 kgs | 84A-88A |
| 125 - 175 lbs / 57-80 kgs | 86A-92A |
| 145 - 195 lbs / 66-89 kgs | 90A-95A |
| 175 - 220+ lbs / 80-100+ kgs | 93A-98A |
- Downhill & TopSpeed
| Skater weight | Durometer |
| 50 - 100 lbs / 23-46kgs | 68A-80A |
| 75 - 125 lbs / 35-57kgs | 80A-85A |
| 100 - 145 lbs / 46-66 kgs | 85A-88A |
| 125 - 175 lbs / 57-80 kgs | 88A-93A |
| 145 - 195 lbs / 66-89 kgs | 90A-96A |
| 175 - 220+ lbs / 80-100+ kgs | 94A-100A |
For loads more additional info on how to choose bushings and dial in your trucks for the perfect ride, check out the longboard bushing and truck setup guide on the Sabre Website. (opens in a new page)
Original: $14.67
-70%$14.67
$4.40Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Want to make your longboard trucks turn more and lean harder? A Sabre Cone kit consists of two Cone bushings in your choice of durometer, plus two cupped cone washers, for maximum lean and carve.
Sabre Bushings are compatible with all longboard trucks out there that use a 16mm/0.6" tall bushing top and bottom. This stack height on Sabre bushings is ever-so-slightly higher than most other truck brands - you can see how they compare in the table below:
| Brand/Truck | Total Stack Height Inc. washers |
| Sabre Standard and Forged | 35.3mm |
| Bear Gen 6 | 34.6mm |
| Carver CX (front and rear) | 34.6mm |
| Paris V3 | 34.6mm |
| Caliber III | 32mm or 37.1mm |
| Pantheon Stylus | 34.2mm |
Each kit contains two bushings and two washers, packed in a recyclable paper bag. Gravity poured from Sabre's own formula in the USA.
- Make your longboard trucks turn more!
- 16mm/0.6" tall
- Kit of 2 bushings and washers - enough for one truck
- Packed with a sticker in a recyclable paper bag
- Available in X-Type (86A Orange), F-Type (90A Teal), R-Type (93A Green) and H-Type (96A Grey)
Use the table below to select the correct durometer:
- Cruising and Carving
| Skater weight | Durometer |
| 50 - 100 lbs / 23-46kgs | 65A-80A |
| 75 - 125 lbs / 35-57kgs | 80A-85A |
| 100 - 145 lbs / 46-66 kgs | 85A-88A |
| 125 - 175 lbs / 57-80 kgs | 87A-91A |
| 145 - 195 lbs / 66-89 kgs | 88A-94A |
| 175 - 220+ lbs / 80-100+ kgs | 91A-97A |
- Freeride
| Skater weight | Durometer |
| 50 - 100 lbs / 23-46kgs | 68A-80A |
| 75 - 125 lbs / 35-57kgs | 80A-85A |
| 100 - 145 lbs / 46-66 kgs | 84A-88A |
| 125 - 175 lbs / 57-80 kgs | 86A-92A |
| 145 - 195 lbs / 66-89 kgs | 90A-95A |
| 175 - 220+ lbs / 80-100+ kgs | 93A-98A |
- Downhill & TopSpeed
| Skater weight | Durometer |
| 50 - 100 lbs / 23-46kgs | 68A-80A |
| 75 - 125 lbs / 35-57kgs | 80A-85A |
| 100 - 145 lbs / 46-66 kgs | 85A-88A |
| 125 - 175 lbs / 57-80 kgs | 88A-93A |
| 145 - 195 lbs / 66-89 kgs | 90A-96A |
| 175 - 220+ lbs / 80-100+ kgs | 94A-100A |
For loads more additional info on how to choose bushings and dial in your trucks for the perfect ride, check out the longboard bushing and truck setup guide on the Sabre Website. (opens in a new page)
